This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.
x
+48 12 255 85 42sales@cptindustry.com
+1 281 516 1771houston@cptindustry.com
+49 2203 358 0660koeln@cptindustry.com
  • a
  • b
  • c
  • d
  • e
  • f
  • g
  • h
  • i
  • j
  • k
  • l
  • m
  • n
  • o
  • p
  • q
  • r
  • s
  • t
  • u
  • v
  • w
  • y
  • z
Згорнути дерево товарРозгорнути дерево товарів

Autotech Controls

Autotech Controls

Autotech Controls – це компанія, що спеціалізується на постачанні рішень для автомобілебудівної індустрії, проте товари та комплексні рішення, пропоновані компанією, також широко використовуються в інших галузях промисловості. Компанія Autotech є частиною американської Групи AVG, що об’єднує ще такі бренди, як EZAAutomation і Uticor. Група була створена в 1975 році і з тих пір випустила на американський ринок понад 500 інноваційних продуктів, а її клієнтами є, зокрема, такі компанії, як Ford, GM, P&G, IBM та Kraft. Компанія Autotech Controls має два технічні центри, відповідальні за дослідження, розвиток і виробництво, зокрема один в місті Керол Стім (штат Іллінойс) та один в містечку Беттендорф (штат Айова). Майже всі продукти розроблені і виготовлені в США. Продукти Autotech Controls славляться своєю надійністю, інноваційністю та надзвичайно високою стійкістю до електричних перешкод. Продукти Групи компаній AVG можна знайти майже в усіх галузях індустрії, включаючи вищезазначену автомобілебудівну промисловість, а також в металургії, харчовій, добувній, нафто- та газопереробній, фармацевтичній промисловості та в виробництві напівпровідників.

Асортимент пристроїв відкриває найвідоміший продукт Autotech Controls, яким є програмований кінцевий вимикач PLS. Компанія Autotech Controls пропонує кілька версій вимикача PLS (Programmable Limit Switch), серед яких ми знаходимо, зокрема, такі моделі, як M1020/25, серію M1050 (у тому числі M1050A, M1051-R10, M1052), M1150/51, M1500, M1950 I2 PLS або M8250, а також нове рішення, яким є сенсорний екран TouchPLS, який призначений для експлуатації вищезазначених вимикачів PLS. Автоматичні вимикачі PLS також можуть бути частиною додаткових моніторів, контролюючих роботу пресів. Клієнт, у залежності від потреб, може вибрати однин з декількох моніторів, які пропонує компанія Autotech Controls, зокрема, монітор тоннажу M1030-E, монітор захисту матриці M1200, або комплексна програма управління для однієї матриці M2020. Наступною позицією в асортименті компанії Autotech Controls є сервера (RL100, RL101, RL210) доступні в корпусах кількох розмірів (size 11, 25 і 40), одно обертові, з редуктором, а також в корпусах захищених від вибухів та підтоплення. Такі обертові трансформатори характеризуються відсутністю внутрішньої електроніки, щіток, витримують великі перепади температур, а також мають екрановані кабелі, які є стійкими до впливу різного роду шумів та перешкод.

В області вимірювання руху Autotech Controls має у своєму портфоліо широкий вибір поворотних інтерментальних і абсолютних енкодерів, які також представленні в 3-х розмірах (size 11, 25 і 40) з підтримкою мережі Profibus або SSI. Новітнім рішенням в пропозиції датчиків є ресивери, що базуються на технології DigiSolvery (доступні в двох розмірах 25 і 40), що трансформують аналоговий сигнал ресивера на цифровий сигнал (ratiometric tracking converter). Така пропозиція технології DigiSolvery доступна в трьох конфігураціях, зокрема однообертові (Single-Turn), однообертові з редуктором (Geared Single-Turn) і багатообертові (Multi-Turn). Для відчитування даних з ресивера є широка гамма декодерів у вигляді моделей DM2, DM7, M1890-S, M1890-R, M1150-M10, M1151 і M8000 і M8350.

Компанія Autotech Controls – це також такі компактні пристрої, як блоки живлення SmartPower™ Supply, що монтується на DIN-шину, віддалені дисплеї RD180 і RD360, перемикачі швидкості (PS111, PS112, PS119, PS127, QS132-134) та модуль сканера DeviceNet.

Для того, щоб повністю ознайомитися з пропозицією компанії Autotech Controls запрошуємо Вас до контакту з нашим офісом, а також відвідати веб-сайт компанії Autotech Controlspod за вказаною нижче адресою:

http://www.autotechcontrols.net

Показати коди товарівПриховати коди товарів
SAC-M1020-010 - M1020 PLSSAC-M1025-010 - M1020 PLSASY-M1020-POI - Operator InterfaceMTP-M1020-010 - Operator Interface
ASY-M1025-POI - Operator InterfaceKSD-A12DC-10A - Power Output RelayKSS-120AC-3AMP - Power Output RelayKSS-60VDC-3AMP - Power Output Relay
KSS-200DC-1AMP - Power Output RelayEMC-M1050-W16 - EnclosureMBK-M1050-011 - Back Panel Mounting BracketSAC-M1050-A10 - M1050 Series PLS
SAC-M1050-M10 - M1050 Series PLSSAC-M1051-010 - M1050 Series PLSSAC-M1051-R10 - M1050 Series PLSSAC-M1052-010 - M1050 Series PLS
SAC-M1053-010 - M1050 Series PLSSAC-M1053-020 - M1050 Series PLSASY-RLYCH-08RL - Relay Output ChassisASY-RLYCH-08SS - Relay Output Chassis
CBL-RLYCH-DA4 - CableCBL-RLYCH-D04 - CableKSD-A12DC-10A - Electromechanical relay, Form A, SPST, 120 VAC @ 10 A, resistiveKSD-012DC-10A - Electromechanical relay, Form C, SPDT, 120 VAC @ 10 A, resistive
KSS-120AC-3AMP - AC Solid-state-relay 120 VAC @ 3 AKSS-60VDC-3AMP - DC Solid-state relay, 10-60 VDC @ 3 AKSS-200DC-1AMP - DC Solid-state relay, 200 VDC @ l AASY-BRAKE-RLY - Relay including socket required to wire brake input to the PLS, 120 VAC coi
ASY-M1052-8P - Optically isolated PNP sourcing output moduleASY-M1052-8PTA - Optically isolated PNP sourcing output module with addition of 4-20 mA analog velocity outputMBK-M1050-011 - Set of 2 back panel mounting brackets to mount M1050 series PLS on back panelENC-M1050-W16 - NEMA 12 enclosure with cutout, mounting holes, and a security clamp
SAC-RS232-485T - Adaptor for RS-232C to RS-485A. Required if a PC is used to connect to the M1051CBL-232MF-9Pxxx - Serial cable for connection of PC to RS-232 port on RS-232C to RS-485A adaptor. Note: xxx = length in ft, 010, 020, 050, and 50 ftCBL-09S22-Daxxx - 9-conductor cable with overall foil shield and sub D connector at one end for RS-485 port on RS-232C to RS-485A adaptor to M1051 serial port. Note: xxx = length in ft, 010, 020, 050, and 50 ftSAC-M1051-SR1.0 - Serial Communication Software for Windows-based programming of M1051 PLS
SAC-M1150-08P - PAK•PLS with 8 PNP type outputs and terminal blocks on the rear for resolver and output connectionsSAC-M1150-08N - PAK•PLS with 8 NPN type outputs and terminal blocks on the rear for resolver and output connectionsSAC-M1150-16P - PAK•PLS with 16 PNP type outputs and terminal blocks on the rear for resolver and output connectionsSAC-M1150-16N - PAK•PLS with 16 NPN type outputs and terminal blocks on the rear for resolver and output connections
SAC-M1151-8X10P - PAK•PLS with 8 Outputs and Programmable Analog Tach/Position Outputs, DC Power Input, and Brake Monitor and four program setupsASY-RLYCH-08RL - Chassis for 8 EM-relay outputs with motion detector output and built-in power supply (Use only KSD-012DC-10A SPDT relay)ASY-RLYCH-16RL - Above with 16 EM-relay output (Use only KSD-012DC-10A SPDT relayASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electromechanical SPDT outputs (using KSD-A12DC-10AMP relays)
ASY-RLYCH-16SS - Above chassis for 16 solid-state relay outputs (using KSD-A12DC-10AMP relays)SAC-M1250-010 - 3-Digit, single-turn, basic unitSAC-M1450-300 - 3-Digit, single-turn, with ModZ and speed compensationSAC-M1450-400 - 4-Digit, single-turn, with ModZ and speed compensation
SAC-M1451-010 - 3-Digit, single-turn, with ModZ, speed compensation and brake monitorSAC-M1450-MROF - 3-Digit, single-turn with speed compensation and multiple rate offsetSAC-M1450-M10 - 6-Digit, single resolver, semi-absolute, basic unitSAC-M1450-D64 - 6-Digit, dual resolver 64:1 ratio, basic unit
SAC-M1450-D128 - 6-Digit, dual resolver, 128:1 ratio, basic unitSAC-1450-LT0 - 6-Digit, Linear Mini PLS basic unitASY-M1250-08TI - TTL outputs, cam module with terminal blockASY-M1250-08TD - 8 TTL outputs, with 15-pin sub D connector
ASY-M1250-08PI - 8 PNP outputs, cam module with terminal blockASY-M1250-08PD - 8 PNP outputs, with 15-pin sub D connectorASY-M1250-08NI - 8 NPN outputs, cam module with terminal blocASY-M1451-LCAMP - Logic Cam output module
ASY-M1451-LCAMN - Logic Cam output moduleASY-M1250-08AC - 8 Output, 120 VAC @ 0.5 A each output, 4 A max. per module, with terminal blockASY-M1250-08DC - 8 Output, 10-28 VDC @ l A each output, 4 A max. per module, with terminal blockASY-M1250-20MAP - Analog position/tach module, 4-20 mA current PNP (sourcing) sourcing output
ASY-M1250-20MAN - Above with current NPN (sinking) outputASY-M1250-010V - Above with 0-10 V analog outputASY-M1250-SER2 - Bidirectional RS-232C serial communication moduleASY-M1250-SER2L - Above module with long-line serial communication
ASY-M1250-SER4 - Bidirectional RS-422A serial communication moduleCBL-09S22-DAxxx - 9-conductor, cable with overall foil shield, and 9-pin sub D connector on one endCBL-15S22-DAxxx - 15-conductor, cable with overall foil shield and 15-pin sub D connector on one endCBL-18S22-Cxxx - 18-conductor shielded cable for use with modules with terminal block
ECM-15PIN-M11 - 15-pin male DSub connectorECM-09PIN-M11 - 9-pin male DSub connectorASY-RLYCH-08RL - Chassis for 8 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay only)ASY-RLYCH-16RL - Above with 16 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay only
ASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relaysASY-RLYCH-16SS - Above chassis for 16 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relaysKSS-120AC-3AMP - Solid-state relay, 120 VAC @ 3 AKSS-60VDC-3AMP - Solid-state relay, 10-60 VDC @ 3 A
KSS-200DC-lAMP - Solid-state relay, 200 VDC @ l AKSD-A12DC-10A - Electromechanical relay, SPST, Form A, 120 VAC @ 10 A, resistiveKSD-012DC-10A - Electromechanical relay, SPDT, Form C, 120 VAC @ l0 A resistive (for use with ASY-RLYCH-xxRL relay chassis only)CBL-RLYCH-DA4 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on both ends, for interconnection of relay chassis to the PLS
CBL-RLYCH-D04 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on one end and open on the other, for interconnection of relay chassis to the PLS cam moduleASY-OUTPT-16RL - Chassis for 16 electromechanical, DPDT relay outputsASY-OUTPT-16SS - Chassis for 16 solid-state relay outputsASY-OUTPT-16RS - Chassis for 8 electromechanical DPDT relay and 8 solid-state relay outputs
KDD-012DC-10SIG - 10 A (any VAC as long as does not exceed 10 A) DPDT electromechanical relayKSS-120AC-ERI - 3 A, 120 VAC, solid-state AC relay moduleKSS-055DC-ERI - 2 A, 3-40 VDC, solid-state DC relay moduleKSS-AC/DC-ERI - Low leakage (<0.1 mA), AC/DC solid-state relay module, 135 VAC (rms) @ 0.35 A or 190 VDC (max.) @ 0.5 A
ENC-M1250-N16 - NEMA 12 (IP52) enclosure for 16-channel PLSENC-M1250-W16 - NEMA 12 (IP52) enclosure for 16-channel PLS with see-through windowENC-M1250-N32 - NEMA 12 (IP52) enclosure for 32-channel PLSENC-M1250-W32 - NEMA 12 (IP52) enclosure for 32-channel PLS with see-through window
ENC-M1250-N40 - NEMA 12 (IP52) enclosure for 40-channel PLSEEC-15PIN-0TB - 15-position terminal block for main terminal block on M1250 and for cam modulesEEC-18PIN-0TB - 18-position Main terminal block for M1450/M1451MCP-M1250-011 - Cover plate for unoccupied cam module space
ECM-15PIN-M11 - 15-Pin sub D male connectorCBL-M1250-INPUT - M1250 to main terminal block connector for back panel mounted systemsCBL-M1250-OUTPUT - M1250/M1450 to output chassis for back panel mount systemsCBL-M1450-INPUT - M1450 to main terminal block connector for back panel mounted systems
SAC-M1250-010 - 3-Digit, single-turn, basic unitSAC-M1450-300 - 3-Digit, single-turn, with ModZ and speed compensationSAC-M1450-400 - 4-Digit, single-turn, with ModZ and speed compensationSAC-M1451-010 - 3-Digit, single-turn, with ModZ, speed compensation and brake monitor
SAC-M1450-MROF - 3-Digit, single-turn with speed compensation and multiple rate offsetSAC-M1450-M10 - 6-Digit, single resolver, semi-absolute, basic unitSAC-M1450-D64 - 6-Digit, dual resolver 64:1 ratio, basic unitSAC-M1450-D128 - 6-Digit, dual resolver, 128:1 ratio, basic unit
SAC-1450-LT0 - 6-Digit, Linear Mini PLS basic unitASY-M1250-08TI - TTL outputs, cam module with terminal blockASY-M1250-08TD - 8 TTL outputs, with 15-pin sub D connectorASY-M1250-08PI - 8 PNP outputs, cam module with terminal block
ASY-M1250-08PD - 8 PNP outputs, with 15-pin sub D connectorASY-M1250-08NI - 8 NPN outputs, cam module with terminal blockASY-M1250-08AC - 8 Output, 120 VAC @ 0.5 A each output, 4 A max. per module, with terminal blockASY-M1250-08DC - 8 Output, 10-28 VDC @ l A each output, 4 A max. per module, with terminal block
ASY-M1250-20MAP - Analog position/tach module, 4-20 mA current PNP (sourcing) sourcing outputASY-M1250-20MAN - Above with current NPN (sinking) outputASY-M1250-010V - Above with 0-10 V analog outputASY-M1250-SER2 - Bidirectional RS-232C serial communication module
ASY-M1250-SER2L - Above module with long-line serial communicationASY-M1250-SER4 - Bidirectional RS-422A serial communication moduleECM-15PIN-M11 - 15-pin male DSub connectorECM-09PIN-M11 - 9-pin male DSub connector
ASY-RLYCH-08RL - Chassis for 8 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay onlyASY-RLYCH-16RL - Above with 16 electromechanical SPDT relay outputs (Use with KSD-012DC-10A SPDT relay onlyASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relaysASY-RLYCH-16SS - Above chassis for 16 solid-state relay outputs or electromechanical SPST outputs using KSD-A12DC-10A relays
KSS-120AC-3AMP - Solid-state relay, 120 VAC @ 3 AKSS-60VDC-3AMP - Solid-state relay, 10-60 VDC @ 3 AKSS-200DC-lAMP - Solid-state relay, 200 VDC @ l AKSD-A12DC-10A - Electromechanical relay, SPST, Form A, 120 VAC @ 10 A, resistive
KSD-012DC-10A - Electromechanical relay, SPDT, Form C, 120 VAC @ l0 A resistive (for use with ASY-RLYCH-xxRL relay chassis only)CBL-RLYCH-D04 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on one end and open on the other, for interconnection of relay chassis to the PLS cam moduleCBL-RLYCH-DA4 - 15-conductor cable, with overall foil shield, 4 ft length and sub D connector on both ends, for interconnection of relay chassis to the PLSASY-OUTPT-16RL - Chassis for 16 electromechanical, DPDT relay outputs
ASY-OUTPT-16SS - Chassis for 16 solid-state relay outputsASY-OUTPT-16RS - Chassis for 8 electromechanical DPDT relay and 8 solid-state relay outputsKDD-012DC-10SIG - 10 A (any VAC as long as does not exceed 10 A) DPDT electromechanical relayKSS-120AC-ERI - 3 A, 120 VAC, solid-state AC relay module
KSS-055DC-ERI - 2 A, 3-40 VDC, solid-state DC relay moduleKSS-AC/DC-ERI - Low leakage (<0.1 mA), AC/DC solid-state relay module, 135 VAC (rms) @ 0.35 A or 190 VDC (max.) @ 0.5 AENC-M1250-N16 - NEMA 12 (IP52) enclosure for 16-channel PLSENC-M1250-W16 - Above enclosure with see-through window
ENC-M1250-N32 - NEMA 12 (IP52) enclosure for 32-channel PLSENC-M1250-W32 - Above enclosure with see-through windowENC-M1250-N40 - NEMA 12 (IP52) enclosure for 40-channel PLSEEC-15PIN-0TB - 15-position terminal block for main terminal block on M1250 and for cam modules
EEC-18PIN-0TB - 18-position Main terminal block for M1450/M1451MCP-M1250-011 - Cover plate for unoccupied cam module spaceECM-15PIN-M11 - 15-Pin sub D male connectorCBL-M1250-INPUT - M1250 to main terminal block connector for back panel mounted systems
CBL-M1250-OUTPUT - M1250/M1450 to output chassis for back panel mount systemsCBL-M1450-INPUT - M1450 to main terminal block connector for back panel mounted systemsSAC-M1500-R10 - M1500 Pc•PLS with POI (Programmable Operator Interface). Without relays for PLS. (Electro-mechanical relays for PLC included)SAC-M1500-S10 - Same as above except with AC/DC solid-state relays for PLC. Select up to 8 relays (AC/DC solid-state) for PLCs and select 8 relays for PLS from section below.
KSD-A12DC-10A - Electromechanical relay SPST, Form A, 120 VAC @ 10 A .KSS-120AC-3AMP - AC Solid-State Relay, 120 VAC @ 3 A .KSS-60VDC-3AMP - DC Solid-State Relay, 10-60 VDC @ 3 AKSS-200DC-1AMP - DC Solid-State Relay, 200 VDC @ 1 A
SAC-M1500-SOFT - Programming software for M1500, runs on IBM-compatible PC. Includes relay ladder logic software for PLC and software for PLSSAC-M1050-SR1.0 - Windows based software for M1500 PLS programmingSAC-RS232-485T - Adaptor for RS-232C to RS-485A required if an IBM-compatible PC is usedCBL-M1500-PRG - Cable, Male RJ 11 phone 6-wire to DB9 male connector with shielded cable for connecting RS-485A port of RS-232C to RS-485A adaptor (SAC-RS232-485T) to M1500 (4 feet in length)
ASY-M1750-011 - 8-channel PLS chassis for electromechanical-relay outputsASY-M1750-1200 - 12-channel PLS chassis for electromechanical-relay outputsASY-M1750-0SS - 8-channel PLS chassis for Solid-state relay outputsASY-M1750-12SS - 12-channel PLS chassis for Solid-state relay outputs
ASY-M1750-359D - Resolver decoder source module, ratiometric, 360 counts, offset and displayASY-M1750-999D - Resolver decoder source module, ratiometric, 1000 counts, offset and displayASY-M1750-DISP - Display source module, no offsetASY-M1700-L11 - Dual-preset, Angle ON/Angle OFF module
ASY-M1700-LTD1 - Single-preset, Angle ON/Digital-time OFF module (1 ms-100 ms/count)MTP-M1750-8DEC - Top plate for decoder source module and 8 channel PLSMTP-M1750-12DEC - Above top plate for decoder source module and 12 channel PLSMTP-M1750-8DIS - Top plate for display source module and 8 channel PLS
MTP-M1750-12DIS - Above top plate for display source module and 12 channel PLSKDD-012DC-10SIG - 10 A, 125 VDC/250 VAC, DPDT electromechanical-relayKSS-120AC-ERI - 3 A, 120 VAC, Solid-state AC relayKSS-055DC-ERI - 2 A, 3-40 VDC, Solid-state DC relay
KSS-AC/DC-ERI - Low-leakage (<0.l mA), AC/DC solid-state relay, 135VAC (rms) @ 0.35 A. or 190 VDC (max.) @ 0.5 AENC-M1700-NEMA - NEMA 12 (IP52) enclosure without see-thru window for 8 channel PLSENC-M1700-W11 - Above enclosure with see-thru window including NEMA 1 plateENC-M1700-N12 - NEMA 12 (IP52) enclosure without see-thru window for 12 channel PLS
ENC-M1700-W12 - Above enclosure with see-thru window including NEMA 1 plateSAC-RD360-010 - Remote angle readout, 0-359SAC-RD999-010 - Remote readout/tachometer, 0-999SAC-M1950-010 - Base unit to support PLS, Die Protection and Tonnage at Angle modules
SAC-M1950-01A - Same as above plus supports Shut Height indication/control and Peak Tonnage ModulesASY-M1950-16x - PLS output module – 16 channelsASY-M1950-DPx - Die Protect Module for up to 8 inputsASY-M1950-PEK2x - Programmable Load (Peak Tonnage) Monitor with 2 channels (can only be used with SAC-M1950-01A
ASY-M1950-PEK4x - Programmable Load (Peak Tonnage) Monitor with 4 channels add (can only be used with SAC-M1950-01A)ASY-M1950-RAx - Tonnage at Angle Module for up to 4 sensors (Sensors are not included, see step 6)ASY-M1950-RSHIx - Resolver (multi-turn) based, absolute, shut-height indication module with 2 programmable limit outputs (Requires (1) SAC-RL210-G128M resolver and cableASY-M1950-RSHCx - Resolver (multi-turn) based, absolute, shut-height control module, consisting of 1 power output chassis, interconnecting cable (4 ft.), 8 relays, 1 SAC-RL210-G128M resolver (resolver cable is not included)
ASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electro-mechanical SPST outputs using KSD-A12DC-10AMP relaysASY-RLYCH-16SS - Chassis for 16 solid state or electro-mechanical SPST (KSD-A12DC-10) relay outputsASY-RLYCH-08RL - Relay chassis with 8 electro-mechanical SPDT outputs (Use only KSD-012DC-10A SPDT relay)ASY-RLYCH-16RL - Relay chassis with 16 electro-mechanical SPDT outputs (Use only KSD-012DC-10A SPDT relay)
SAC-M8000-010 - 2-slot, A-B 1771 I/O Direct Transfer CradleSAC-VM6EU-010 - GE/Fanuc 9070 VME CradleSAC-TO505-010 - Siemens TI-505 CradleASY-M8251-010 - 3-Digit, 16 PLS Outputs, 1 Motion and 1 Fault Output
ASY-M8251-F10 - 3-Digit, 16 (fast) PLS Outputs, 1 Motion and 1 Fault OutputASY-M8250-POUT - PNP Sourcing OutputASY-M8250-NOUT - NPN Sinking OutputSBM-M1025-E7R - Standard Brake wear Unit with 3/8” shaft E7R Resolver, cable not included
SBM-M1025-RL100 - Standard Brake wear Unit with 5/8” shaft RL100 Resolver, cable not includedASY-M1025-POI - Plug-in Programming Interface PanelCBL-10T22-Mxxx - 22 Autotech, 10 conductor (5 twisted pairs) overall foil shielded cable, with 10-pin MS connector. xxx = to be filled in width length in feetSAC-M1030-RD4 - Base unit for tonnage at angle for up to 4 sensors. Relays are included for Q, D, and P outputs.
SAC-M1030-R08 - Base unit for tonnage at angle for up to 8 sensors. Relays are included for Q, D, and P outputs.SAC-M1030-GR4 - Base unit for 4 sensors with Graphic Communication Link for On-Line Monitoring and Profile ManagementSAC-M1030-GR8 - Base unit for 8 sensor with Graphic Communication Link for On-Line Monitoring and Profile Management.SAC-M1030-GM04 - Base unit for 4 sensors with Graphic Communication Link for On-Line and Critical Curve Monitoring.
SAC-M1030-GM08 - Base unit for 8 sensors with Graphic communication Link for On-Line and Critical curve Monitoring.SAC-M1030-SEND - 1 strain gauge sensor with amplifier assembly, box and cover, 2 torque pads and 4 mounting screws ¼ - 28 x ¾” socket head capSAC-M1030-SENW - 1 strain gauge sensor with amplifier assembly, box cover, 2 weld pads, 2 torque pads, and 4 mounting screws (1/4 – 28 x ¾” socket head cap)ASY-M1030-AMPD - Retro-fit amplifier assembly includes amplifier assembly for die sensors, screw terminals for sensor connection
ASY-M1030-AMP - Retro-fit amplifier assembly includes Amplifier assembly mounted on standard cover, screw terminals for sensor connectionASY-M1030-STG - Strain Gauge Element, with connector for Autotech’s Amplifier AssemblyKIT-M1030-INSTL - Installation kit includes Gauge block and temporary mounting screw, #8 HS drill bit, ¼ - 28 NF tap, and 4 temporary weld pad mounting screwsKIT-M1030-TORQ - Torque Pads (2), and mounting screws (4) ¼ x 28 x ¾”
KIT-M1030-WELD - Weld Pads (2), and temporary screws (4) ¼ - 28 x 1”SAC-M1030-SOFT - “PC” software used in conjunction with the Graphic Communication LinkSAC-M1030-SFTGM - “PC” software used in conjunction with the Graphic Communication Link and Critical CurveSAC-RS232-485T - Adaptor for RS232 to RS485 required if an IBM compatible PC is used instead of T60
SHT-M1150-M10P0 - Standard Unit, Rotary ShutHeight Monitor with PNP (Sourcing) outputsSHT-M1150-E7R - Rotary ShutHeight Monitor with PNP output, E7R Resolver, 30ft. resolver cableSHT-M1150-RL100 - Rotary ShutHeight Monitor with PNP output, RL100 Resolver, 30ft. resolver cableSDP-M1200-00E - Standard Unit with 4 sensor inputs, 4 PLS outputs, 4 counters with Electromechanical Relay
SYS-M1200-E7R - Complete System with 4 sensor inputs, 4 PLS outputs including Electromechanical Relays, 4 counters, 3/8” shaft E7R Resolver, 30 ft. CableSYS-M1200-RL100 - Complete System with 4 sensor inputs, 4 PLS outputs including Electromechanical Relays, 4 counters, 5/8” shaft RL100 Resolver, 30 ft. CableSHT-M1450-LNR - Standard Unit, Linear ShutHeight Monitor without Limit output module and Linear TransducerSAC-M1950-010 - Base unit to support PLS, Die Protection and Tonnage at Angle modules
SAC-M1950-01A - Same as above plus supports Shut HeightASY-M1950-16x - PLS output module – 16 channelsASY-M1950-DPx - Die Protect Module for up to 8 inputsASY-M1950-PEK2x - Programmable Load (Peak Tonnage) Monitor with 2 channels (can only be used with SAC-M1950-0-A
AXY-M1950-RAx - Tonnage at Angle Module for up to 4 sensors (Sensors are not included), see step 6)ASY-M1950-RSHIx - Resolver (multi-turn) based, absolute, shut-height indication module with 2 programmable limit outputs (Requires (1) SAC-RL210-G128M resolver and cable)ASY-M1950-RSHCx - Resolver (multi-turn) based, absolute, shut-height control module, consisting of 1 power output chassis, interconnecting cable (4 ft.), 8 relays, 1 SAC-210-G128M resolver (resolver cable is not included)ASY-RLYCH-08SS - Chassis for 8 solid-state relay outputs or electro-mechanical SPST outputs using KSD-A12DC-10AMP relays
ASY-RLYCH-16SS - Chassis for 16 solid state or electro-mechanical SPST (KSD-A12DC-10A SPDT relay)ASY-RLYCH-08RL - Relay chassis with 8 electro-mechanical SPDT outputs (Use only KSD-012DC-10A SPDT relay)ASY-RLYCH-16RL - Relay chassis with 16 electro-mechanical SPDT outputs (use only KSD-012DC-10A SPDT relay)SAC-M2020-010 - Resolver based, Single die set control, basic and without any I/O’s, resolver or cable
SAC-M2022-010 - Above for dual die set controlSAC-M2020-L10 - Linear transducer based, Single die set control, basic unit without any I/O’s, rod or cableSAC-M2022-L10 - Above for dust die set controlASY-M2020-INPUT - Die select module, used with Die ID box
ASY-M2020-OTPUT - Output card, 8 outputsASY-RLYCH-08RL - Chassis for up to 8 EM relaysASY-M2020-DIID - Die ID Box (Required one for each die)CBL-RLYCH-DA4 - 15 conductor cable with overall foil shield, 4 ft. length and DSub connector on both ends for interconnection of relay chassis to M2020 or M2022 (8 outputs per cable)
KSD-012DC-10A - Electro-mechanical relay SPDT, 120 VAC @ 10 amps resistive (Note: for use with ASY-RLYCH-08RI relay chassis only)SAC-M2022-S128 - Above for dual die set control includes 2 resolvers, 2 output modules, 1 Die select moduleSAC-M2022-SCA - Same as SAC-M2020-SCA except with dual die set control: 2 output cards, 2 resolvers and 2 power output relays with 2 interconnecting cables.SAC-M2022-SLIN - Above for dual die set control with 2 output modules, 1 Die select module. (Transducer rods not included)
MRS-RL101-RAD06 - Brushless resolver, single turn, size 11, 20” arc minimum accuracy (Replacement for SAC-RL101-010MRS-RL101-RAD20 - Brushless resolver, single turn, size 11, 20” arc minimum accuracy (Replacement for SAC-RL101-011SAC-RL100-010 - AUTOTECH ResolverSAC-RL100-M11 - AUTOTECH Brushless resover
SAC-RL100 - Size 40 Geared Single-turn ResolverSAC-RL210 - Size 40 Geared Single-turn ResolverSAC-RL210-G004 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia., 4:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G004M - Above with MS connector for wiring
SAC-RL210-G008 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia., 8:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G008M - Above with MS connector for wiringSAC-RL210-G016 - Dual Brushless resolver, gear train between the two resolvers, terminal block for wiringSAC-RL210-G016M - Above with MS connector for wiring
SAC-RL210-G032 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia. 32:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G032M - Above with MS connector for wiringSAC-RL210-G064 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia. 64:1 built-in gear train between the two resolvers, terminal block for woringSAC-RL210G064M - Above with MS connector for wiring
SAC-RL210-125 - Dual Brushless resolver, multi-turn, NEMA 13, 5/8" shaft dia. 128:1 built-in gear train between the two resolvers, terminal block for wiringSAC-RL210-G128M - Above with MS connector for wiringE8R-SY101 -000MC - Explosion-proof, Selsyn resolver, single-turn, FM-approved Div. 1, Class 1, Groups B, C, and D, terminal connections, conduit fitting, 5/8" (15.88 mm) shaft diaE8R-RL101 -000MC - Explosion-proof, brushless resolver, single-turn, FM-approved Div. 1, Class 1, Groups B, C, and D, terminal connections, 5/8" (15.88 mm) shaft dia
SAC-RL501-500 - RL501 Pancake ResolverCPL-001/4-1/4 - 1/4" to 1/4" (6.35 mm to 6.35 mm)CPL-003/8-3/8 - 3/8" to 3/8" (9.53 mm to 9.53 mm)CPL-005/8-5/8 - 5/8" to 5/8" (15.88 mm to 15.88 mm)
EPM-10PIN-ITT - 19 pin male MS connector for multi-turn resolvers with MS connector (MS 3112E-14-19P)EPM-19PIN-ITT - 19-pin male connector for single-turn resolvers with MS connector (MS 3112E-14-19P)MMB-EN359-010 - Mounting bracket for sizes 25 & 40 resolversA15–30V5-AL-C6-003 - Optical Incremental Encoder
A25–PI–F–30V/5–S–10DL–AL - Smart-EncoderECM-05PIN-12MM - Communication Cable - 5-pin, size M12, mating connector, (female, cable end)ECM-07PIN-M16M - Communication Cable - 7-pin, size M16, mating connector, (female, cable end)ECM-08PIN-12MM - Communication Cable - 8-pin, size M12, mating connector, (female, cable end)
ECM-10PIN-M18 - Communication Cable - 10-pin, size M18, mating connector, (female, cable end)ECM-10REC-ITT - Communication Cable - 10-pin, size M12, mating connector, (female, cable end)E5N-G4096-8POME - Single-turn DigiSolver, NEMA 13, size 40 (4" dia), Heavy Duty, Gray code output 4096 counts, Input 8-30 VDC, PNP Sourcing Transistor Digital Output, Face Mount w/ End Mount ConnectorE5N-D3600-5TPRE - Geared Single-turn DigiSolver, NEMA 13, size 40 (4" dia), Heavy Duty, BCD output 3600 counts, Input 5 VDC, TTL with multiplexing Digital Output, 16:1 Gear Ratio, Face Mount w/ End Mount Connector with PC-sync circuit
E7N-AP20M-800FS - Single-turn DigiSolver, NEMA 13, size 25 (2.5" dia), Medium Duty, Analog output 4-20 mA current Sourcing, Input 8-30VDC, Flange Mount w/ Side Mount ConnectorMMB-EN359-010 - Mounting Bracket for E5, E7, & E8 DigiSolversCPL-003/8-3/8 - 3/8” to 3/8” Flexible coupling (1” dia. X 1.25” length)CPL-005/8-5/8 - 5/8” to 5/8” Flexible coupling (1.25” dia. X 1.5” length)
ECM-19REC-ITT - Mating MS Connector, 19 pin (for single-turn units)SAC-P5VDC-010 - Regulated DC Power Supply, 5VDC @ 3 AmpSAC-P12DC-010 - Regulated DC Power Supply, 12VDC @ 1 AmpSAC-P24DC-010 - Regulated DC Power Supply, 24VDC @ 1 Amp
SAC-RD360-010 - Remote angle readout, 0 to 359SAC-RD999-010 - Remote readout/tachometer/latch, 0 to 999 (CMOS compatible)SAC-RD999-MUX - Same as above (TTL/CMOS compatible with mux output)E8N-AP20M-800MC - Single-turn DigiSolver, Class 1, Div. 1, NEMA 4X Explosion Proof, size 40 (4" housing dia, 5/8" shaft dia), Heavy Duty, Analog Output 4-20 mA current sourcing, Input 8-30 VDC, Face Mount w/ Conduit Side Mount (terminal block)
E8N-G1024-8PORC - Geared Single-turn DigiSolver, Class 1, Div. 1, NEMA 4X Explosion Proof, size 40 (4" housing dia, 5/8" shaft dia), Heavy Duty, Gray code output 1024 counts, Input 8-30 VDC, PNP Sourcing Transistor Digital Output, 16:1 Gear Ratio, Face Mount w/ Conduit Side Mount (terminal block)DM2-STRAK - Single-Turn Resolver Decoder Snap Track MountDM7 - Programmable Resolver DecoderM1890-R - Programmable Position Transducer
M1890-S - Programmable Position Transducer and Selsyn IndicatorM1150-M10 - Programmable Resolver Decoder Multi-Turn with LimitsM1151 - Multi-Turn DecoderM8000 - Resolver Decoder Input Modules
ASY-M8350-010 - M8350 Resolver Decoder BusModuleE7R- RL101-000FE - Brushless resolver, Single Turn, NEMA 13, 3/8” shaft, Flange mount, end connectorE7R- RL101-000FS - Brushless resolver, Single Turn, NEMA 13, 3/8” shaft, Flange mount, end connectorSAC-RD180-M10 - Remote Display Master
SAC-RD180-010 - Remote Slave Display (Must be used with a master PLS or DecoderSAC-RD360-010 - Remote Display for displaying BCD data for position in 000-999 rangeSAC-RD999-010 - Remote Display for displaying BCD data for position & RPM in 000-999 rangeSAC-RD999-MUX - 3-Digit BCD display, with multiplex option to display position & RPM in 000-999 range. (Used with M1250 and M1450 only, equires 1 BCD and 1 tach module.)
SMC-PS111-05SEC - Zero-speed switch, 12-1200 PPM minimumSMC-PS111-30SEC - Zero-speed switch, 2-200 ppm minimumSMC-PS111-60SEC - Zero-speed switch, 1-100 ppm minimumSMC-PS111-180SEC - Zero-speed switch, 1/3-30 ppm minimum
SMC-PS112-1500 - Adjustable Speed Sensor, 150-1500 ppmSMC-QS132-010 - Proximity Sensor, unshielded, 0-60” sensing range (includes mounting bracket)SMC-QS133-010 - Proximity Sensor, shielded, 0.250” sensing range (includes mounting bracket)ADP-QS132-011 - Adapter 30mm to ½”, 14 NPT (internal) conduit
SMC-PS119-MRSIR - Anti-Plugging Zero Speed SwitchSMC-PS119-RLY - Relay 10 A, 2 form C output contacts for straight zero-speed applicationSMC-PS119-MM11 - Memory Module for ability to start in the same direction before coming to a stopSMC-PS119-CEM - Chassis for use with PS119-RLY relay output
SMC-PS119-CEM11 - Chassis for use with PS119-MM11 Memory ModulesSMC-PS127-A10 - Voltage Sensor, Zero-Speed SwitchQS132-134 - Proximity Switches/SensorsSMC-QS132-010 - Unshielded, 06” sensing range
SMC-QS133-010 - Shielded, 0.25” sensing rangeSMC-QS134-010 - Shielded, 0.2” sensing rangeSAC-QDNET-010 - TSX Qaunntum DeviceNet Scanner Module